MFactory

Gearing/Transmissions are a very much overlooked aspect of a modifier. You could get away with it on a street car, but its absolutely crucial on a circuit car. 

A good LSD, close ratios and final drive helps keep the car in the power band and on the boil where you want it.

MFactory has been providing quality transmission products to the market for several years now and is now a leading manufacturer of race transmissions components especially for the Honda. I'm honoured to have had the support of Mfactory these past few years.

Setting up the MFactory Metal LSD.

Enthusiasts do not sometimes realise how sophisticated the Mfactory LSD is. While it caters to the lay user, for the more advance user, they can appreciate the adjustability of the MFactory LSD.

From Pre-load, using springs as above, to adjusting between 2 different types of LSD actions, in this case between a 1.0 and 1.5 way.

Our setup will have the LSD set to a 1 way, which is suitable to FWDs.

Fully re-buildable as well.

Finally, Thanks to MFactory for the following parts.

1) An MFactory Metal 1.0/1.5 way LSD

2) MFactory Close Ratio Straight Cut gears

3) High Load High Speed Transmission Bearings

4) Carbon lined synchro, sleeve and hub set